HP StorageWorks Fabric OS 5.3.x administrator guide (5697-0244, November 2009)

Fabric OS 5.3.0 administrator guide 97
It might take several days to receive the certificates. If the certificates arrive by email, save them to an FTP
server. If the CA provides access to the certificates on an FTP server, make note of the path name and make
sure you have a login name and password on the server.
Installing a switch certificate
Perform this procedure on each switch:
1. Connect to the switch and log in as admin.
2. Enter this command:
3. Select a protocol, enter the IP address of the host on which the switch certificate is saved, and enter
your login name and password:
The certificate downloads to the switch.
Activating a switch certificate
Enter the configure command and respond to the prompts that apply to SSL certificates:
Example
After you exit the configure command, the HTTP daemon restarts automatically to handle
HTTPS requests.
switch:admin> seccertutil import
Select protocol [ftp or scp]: ftp
Enter IP address: 192.10.11.12
Enter remote Directory:
path_to_remote_Directory
Enter certificate name (must have “.crt” suffix):192.1.2.3.crt
Enter Login Name:
your_account
Enter Password: *****
Success: imported certificate [192.1.2.3.crt].
To use this certificate, run the configure command to activate it
SSL attributes Type yes.
Certificate File Enter the name of the switch certificate file: for example,
192.1.2.3.crt.
CA Certificate File If you want the CA name to be displayed in the browser window,
enter the name of the CA certificate file; otherwise, skip this
prompt.
Select length of crypto key Enter the encryption key length (40, 56, or 128 ).
HTTP attributes Type yes.
Secure HTTP enabled Type yes.
Configure...
System services (yes, y, no, n): [no]
ssl attributes (yes, y, no, n): [no] yes
Certificate File. (filename or none): [10.33.13.182.crt] 192.1.2.3.crt
CA Certificate File. (filename or none): [none]
Select length of crypto key.
(Valid values are 40, 56, and 128.): (40..128) [128]
http attributes (yes, y, no, n): [no] yes
HTTP Enabled (yes, y, no, n): [yes] no
Secure HTTP Enabled (yes, y, no, n): [no] yes