HP StorageWorks SAN Director Cable Management Comb Installation Instructions (AG562-96001, November 2006)

HP StorageWorks
SAN Director cab
le
management comb installation
instructions
© Copyright 2006 Hewlett-Packard Development Company, L.P.
First edition (November 2006)
Product names mentioned herein may be trademarks of their
respective companies as reflected by an associated footnote.
The information in this document is subject to change without
notice.
Printed in the US
www.hp.com
*A
G562-96001*
Overview
Read these instructions to install the high density HP StorageWorks
cable management comb. This device allows you to easily view LEDs
by grouping cables away from the port blades.
Intended audience
These installation instructions are intended for use by system technicians
who are experienced with:
• Setting up devices in a SAN
• HP StorageWorks Fibre Channel SAN Directors
Related documentation
For the latest information, documentation, and firmware releases, please
visit the following HP StorageWorks web site:
h
ttp://www.h
p.com/country/us/eng/prodserv/storage.html
Compatibility
Use this HP StorageWorks cable management comb with HP
StorageWorks B-series SAN Director models.
Time and items required for install
The i nstallation takes less than 5 minutes. Obtain the following items:
• HP StorageWorks cable management comb
• #1 Phillips screw driver
CAUTION:
Do not use a power screwdriver for the cable management
comb install.
Page 1