HP Application Recovery Manager software A.06.10 Administrator's guide (March 2008)

Default: 2 seconds.
SSEA_SYNC_REPORT_RATE: During the disks’ resynchronization, XP Agent checks
the mirrored disks’ status in intervals determined by SSEA_SYNC_SLEEP_TIME.
SSEA_SYNC_REPORT_RATE determines the rate of displaying the mirrored disks
status. For example, if SSEA_SYNC_SLEEP_TIME is 5 seconds and
SSEA_SPLIT_REPORT_RATE is 2, the status is displayed for every second check
(every 10 seconds).
Default: 2.
SSEA_SYNC_SLEEP_TIME: During the disks’ resynchronization, XP Agent checks the
mirrored disks’ status. SSEA_SYNC_SLEEP_TIME determines the time interval between
the status checks.
Default: 5 seconds.
SSEA_WAIT_PAIRS_PROPER_STATUS: All disk pairs must be in proper status (either
STAT_PSUS/SSUS or STAT_PAIR) before a process continues. This variable defines
the maximum waiting period for disk pairs to change to proper status.
SMB_SCAN_FOR_VOLUME_TIMEOUT: On Windows, sets the maximum time (in
seconds) for which a ZDB Agent on the backup system waits for new volumes to
appear on the backup system. This happens after a physical drive is detected during
backup system preparation.
Default: 300 seconds. Usually, it is sufficient, unless there are configuration problems
on the backup system.
Default: 120 minutes.
Administrator's guide 111