HP Application Recovery Manager software A.06.10 Administrator's guide (March 2008)

7. Filesystem backup: You can modify options for the listed object by clicking the
object and then Properties. For information on the Object Property, press F1.
Disk image backup:
a. Click Manual add to add disk image objects.
b. Select Disk image object and click Next.
c. Select the client and click Next.
d. Specify General Object Options. For information on these options, press
F1.
e. In the Disk Image Object Options window, specify disk image sections.
HP-UX :
Specify a rawdisk section:
/dev/rdsk/filename, for example: /dev/rdsk/c2t0d0
On HP-UX 11.31, the new naming system can be used:
/dev/rdisk/disk#, for example /dev/rdisk/disk2
Specify a raw logical volume section:
/dev/vgnumber/rlvolnumber, for example: /dev/vg01/rlvol1
IMPORTANT:
To ensure that instant recovery is successful and the environment is
consistent after instant recovery, select all filesystems on logical volumes
inside a volume group to be backed up on UNIX or all partitions on a
disk on Windows. Even if you do not select whole volume group or
disk, the backup will be successful, but instant recovery may experience
issues during the configuration check of the environment. This check
may be disabled by clearing the instant recovery option
Check the data configuration consistency and the entire volume group
or disk will be overwritten.
Windows:
Use the following format:
\\.\PHYSICALDRIVE#
where # is the current number of the disk to be backed up.
Backup38