HP Application Recovery Manager software A.06.10 Administrator's guide (March 2008)

Note that if the filesystem on the application system is busy and cannot
be dismounted, the backup session will fail.
Default: not selected.
Create a command which you can use as the Stop/quiesce the application
option. The command must reside in /opt/omni/lbin (UNIX) or
AppRM_home\bin (Windows) on the application system and you specify
only the filename in the backup specification.
Stop/quiesce
the application
This command is executed on the application system before replica
creation. It can be used to stop the applications not integrated with
Application Recovery Manager.
If this command fails, Restart the application (see below) is not executed.
Therefore, you need to implement a cleanup procedure in Stop/quiesce
the application. Note that if the ZDB_ALWAYS_POST_SCRIPT variable
is set to 1, Restart the application is always executed if set (default is 0).
See “ZDB omnirc variables” on page 106 for details.
Create the command which you can use as the Restart the application
option. The command must reside in /opt/omni/lbin (UNIX) or
AppRM_home\bin (Windows) on the application system and you specify
only the filename in the backup specification.
Restart the
application
This command is executed on the application system after replica creation.
It can be used to restart the applications not integrated with Application
Recovery Manager.
Table 9 EVA backup system options
Not available if the application system is also the backup system.Use the same
mountpoints as
Select this option to mount the filesystems on the replica to the same mount
points on the backup system as used on the application system.
on the
application
system
If the mount points are already in use, the session will fail. You can select
the option Automatically dismount the filesystems at destination mount
points to prevent this.
On Windows , the drive letters must be available, or the session will fail.
Default: not selected.
Available only if Use the same mount points as on the application system
is not selected.
Root of the
mount path on
the backup
system
Specifies the root directory under which the filesystems from the replica
will be mounted.
Where exactly the filesystems are mounted depends on how you specify
Create the mount path with the attributes.
Administrator's guide 41