Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

7-14 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
7
Managing IP Routes for a GbE Port
You can configure a new IP route, edit an existing user-defined IP route, or delete an IP route by
clicking the Add, Edit, and Delete tasks respectively on the IP Routes tab for a GbE port.
To add a new IP route
1. Click a port in the Switch View to launch the Port Management module in a separate window (see
Figure 5-1 on page 5-2).
2. Click the GigE Ports subtab.
3. Click the port you want to edit.
4. Click the IP Routes subtab.
Figure 7-5 IP Routes Tab for GbE Ports
5. Click Add in the task bar.
Type the destination IP address, subnet mask, gateway IP address, and metric for the new IP route.
6. Click Add.
N
ote
For each IP interface created in the GbE port, one default IP route will be automatically created.
C
aution
If IPSec is enabled, you are allowed only one static route per GbE port.