Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

Web Tools Administrator’s Guide 15-11
Publication Number: 53-0000194-01
15
3. From the left pane, select the GbE port that will be used.
4. Select the IP Route tab.
5. Click Edit.
A warning dialog box appears similar to Figure 15-5 on page 15-9.
6. Click OK.
Figure 15-8 Edit IP Route Dialog Box
7. Enter a new value for the metric.
8. Click OK.
If you want to change a value other than the metric, you will need to delete this route and create another
in its place.
Managing the iSCSI Virtual Targets
iSCSI virtual target creation is the first pane in the iSCSI Target Gateway Admin module. The iSCSI
Virtual Target wizard provides two ways to create iSCSI targets: Create and Easy Create. Both
procedures are simple to use, but Create allows you to double check your work several times before
committing the changes.
When editing a virtual target, you can add LUNs, but you will only be able to remove LUNs that have
not been put to full use or fully initialized as a target. If the target is already in use then the button will
be grayed out.
To create iSCSI virtual targets
1. Launch the iSCSI Target Gateway Admin module as described on page 15-6.
2. Select the Targets tab.
3. Click Create.
The VT Configuration wizard displays.