Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

15-16 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
15
In the wizard:
• You can configure the DD. You specify the DD name, and then you can add or remove initiators
and targets. You can also add any offline device(s) by entering the IQN name in the IQN name field
and clicking Add Offline Devices under the list on the right. The offline device name will be added
to the Selected List.
• You can also filter out initiator and targets from the tree in the Selection List by using the Filter
button. You can enter the full or partial name of an iSCSI member in the IQN Name text box and
clicking the Filter button. Based on the filter criteria, the tree will display only those members
satisfying the filter criteria. You then add the device by selecting the device and clicking the Add
button. In order to view the all available initiators and targets, click Show All.
To create a discovery domain
1. Launch the iSCSI Target Gateway Admin module as described on page 15-6.
2. Select the Discovery Domains tab.
3. Click Create DD.
The Create DD wizard is launched.
Figure 15-13 Create DD Wizard
4. Follow the instructions in the wizard to create an iSCSI discovery domain.
The wizard is self-explanatory, so the individual steps are not described in this document.