Manualshelf

Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP B-series 48-80 Port SAN Switch Server Application Optimization LTU
281282283284285286287288289290
18-8 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
18
The Port Connectivity table (shown in Figure 18-4 on page 18-11) displays the Port number (in
physical-location format), Port Name (port address name), Block attribute, Prohibit attribute, and Area
Id (port address, displayed in hexadecimal) in fixed columns. The right side is a port matrix, which lists
all ports by Area ID and identifies prohibited ports. Those columns are scrollable and swappable.
Displaying CUP Port Connectivity
Configurations
Use the following procedure to display a list of CUP port connectivity configurations, as shown in
Figure 18-3 on page 18-9.
To display the CUP Port Connectivity Configurations list
1. Click a FICON-enabled switch from the Fabric Tree.
2. Launch the Switch Admin module as described on page 3-3.
3. Click the FICON CUP tab.
The FICON CUP tabbed page displays, with the FICON Management Server subtabbed page in
front (see Figure 18-1 on page 18-3). All attributes on this page are read-only until FMS mode is
enabled.