Manualshelf

Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

ManualsBrandsHP ManualsComputer AccessoriesHP B-series 48-80 Port SAN Switch Server Application Optimization LTU
61626364656667686970
3-6 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
3
Enabling and Disabling Blades
The procedure in this section applies only to the SilkWorm 24000 and 48000 directors (bladed
switches).
To enable or disable a blade
1. Launch the Switch Admin module as described on page 3-3.
2. Click the Blade tab.
The Enable Blade column in the Blade tab pane indicates whether the blade is enabled.
Figure 3-3 Blade Tab
3. Check the Enable Blade checkbox for each blade you want to enable. Uncheck the checkbox to
disable the blade. You cannot enable or disable the CP blades.
4. Click Apply.