Brocade Web Tools Administrator's Guide (53-0000194-01, November 2006)

3-18 Web Tools Administrator’s Guide
Publication Number: 53-0000194-01
3
Synchronizing Services on the CP
A nondisruptive CP failover is only possible when all the services have been synchronized between
both CPs.
To synchronize the services
1. Launch the Hi Avail module as described in “Launching the High Availability Module” on
page 3-16.
2. Verify that HA Summary field displays Non-Disruptive Failover Ready.
If the HA Status field displays Non-Disruptive Failover Ready, you are done.
If the HA Status field displays Disruptive Failover Ready, continue with step 3.
3. Click the Synchronize Services button.
The Warning dialog box displays.
4. Click Yes and wait for the CPs to complete a synchronization of services, so that a nondisruptive
failover is ready.
5. Click Refresh to update the HA Status field.
When the HA Status field displays Non-Disruptive Failover Ready, a failover can be initiated
without disrupting frame traffic on the fabric.