HP StorageWorks Fabric OS 5.2.3 Release Notes (AA-RWEYD-TE, November 2007)

WhenusingSMIAgenttoconnecttoaswitchinalargerfabricthat
contains more than 383 FDMI devices, the LoginAsUser fails and the
switchpanics;iteitherrebootsordoesHAfailoverdependingon
platform.
Fixed per Fabric OS 5.2.1.
Removing a swi
tch from a fabric causes trace files on remote switches
to generate er
ror message. Only applies to switches running 5.2.0x.
Fixed per Fabric OS 5.2.1.
Switch panics with remote procedure call daemon (rpcd) during
process link incident record (LIRR), due to improperly initializing data
structure.
Fixed per Fabric OS 5.2.1.
Registration to storage array by storage management agent fails with
CRC error on FC side when write data not 4-byte aligned.
Fixed per Fabric OS 5.2.1.
After upgrade to Fabric OS 5. 0.5x, dual CP switches show excessive
TRCK-1004 l
ogs, though no change to the configuration.
Fixed per Fa
bric OS 5.2.1.
AfterconnectingMPR400tonativemodeswitchfabricwithlargezone
DB, FCR daemon panicked. Only applies to switches running 5.2.0x.
Fixed per Fabric OS 5.2.1.
Name Server daemon crash and switch panic after failed attempt to
enable large zone configuration (D,P format).
Fixed per Fabric OS 5.2.1.
swAgtCmtyTable shows no entries when queried through SNMPv3
client, but does show entries when queried through SNMPv1.
Fixed per F
abric OS 5.2.1.
Switch error exception when trying to getInstance of NodeFCPort of
FDMI enabled HBA attached to v3.2/v4.4.0d switch, when Fabric OS
4.4.0d or 5.0.1 switch is proxy.
Fixed per Fabric OS 5.2.1.
When log display contains many messages, the window size covers
most of the Web Tools display. No functional impact.
Fixed per Fabric OS 5.2.1.
Java console will report a Null Pointer Exception under rare
circumstances when clicked on SFP, Loop tabs under port information
tab. Switch operations unaffected.
Fixed per Fabric OS 5.2.1.
Using third party chassis management software to Restore Factory
Defaults can result in loss of telnet connectivity.
Fixed per Fabric OS 5.2.1.
Internal ports on embedded switches are erroneously shown as having
SFPs with Fabric Watch.
Fixed per Fabric OS 5.2.1.
FCIP diag fails if external link goes offline/online during POST.
Fixed per Fabric OS 5.2.1.
Host in one edge fabric fails to see targets in another edge fabric
when routing policy changed from ex change based to port based
in the backbone (4/256).
Fixed per Fabric OS 5.2.1.
FCsideofthethroughputonFR4-18idoesnotincreaseatexpected
ratio when G E compression enabled.
Fixed per Fabric OS 5.2.1.
Portshow not displaying IPIF present in configDBforGE1ofMPR
400.
After using portcfg to configure the port, c annot configure IPIF.
Gets
error IP address already configured on Port ge1.
Fixed per Fabric OS 5.2.1.
Duringinteroptesting,ex_portsstatusdoesnotchangeafterenabling
them from Web Tools.
Fixed per Fabric OS 5.2.1.
Web Tools columns like Name, State, Reason, etc., from Fabric Watch
tree (port class) are restored mistakenly after auto refresh.
Fixed per Fabric OS 5.2.1.
CAM
entriesonsharedportshouldsetupinconjunctionwithzoning
on
existingAD,butareallthesameacrossADs.
Fixed per Fabric OS 5.2.1.
We b Tools Events show wrong date after time zone is changed, until
switch is rebooted.
Fixed per Fabric OS 5.2.1.
Core files should be automatically deleted after supportsave
command is invoked, but are left on the switch.
Fixed per Fabric OS 5.2.1.
HP StorageWorks Fabric OS 5.2.3 release notes
17