Brocade Network Advisor Migration Guide - Supporting Network Advisor 11.1.X (53-1002321-01, May 2011)

Brocade Network Advisor Migration Guide 29 of 82
53-1002321-01
DCFM migration
c. Enter a port number in the Starting Port # field (default is 24600).
NOTE
The server requires 13 consecutive free ports beginning with the starting port number.
d. Enter a port number in the Syslog Port # field (default is 514).
NOTE
If the default syslog port number is already in use, you will not receive any syslog messages from the device.
To find and stop the process currently running on the default Syslog port number, refer to “Syslog
troubleshooting” on page 80.
e. Enter a port number in the SNMP Port # field (default is 162).
f. Click Next.
If you enter a Syslog port number already in use, a message displays. Click OK to close the message. Edit
the Syslog port number and click Next.
If you enter a port number already in use, a Warning displays beneath the associated port number field. Edit
that port number and click Next.
9. Verify your configuration information on the Server Configuration Summary screen and click Next.
10. Select the Start Client check box, if necessary, on the Start Server screen.
Make sure that the Administrative Tools - Services window is closed. If this window is open, the server may fail to
start.
11. Click Finish.
After all of the Network Advisor services are started, the Log In dialog box displays.
12. Enter your user name and password.
The defaults are Administrator and password, respectively. If you migrated from a previous release, your
username and password do not change.
13. Click Login.
14. Click OK on the Network Advisor Login Banner.
To migrate from Professional software to Trial or Licensed Version software, refer to “Network Advisor migration”
on page 43.