Brocade Network Advisor Migration Guide - Supporting Network Advisor 11.1.X (53-1002321-01, May 2011)

78 of 82 Brocade Network Advisor Migration Guide
53-1002321-01
Configuring an explicit server IP address
Migrating DCFM 10.4.X from a 32-bit server
If you are migrating data from a 32- bit server to a 64-bit server, complete the following steps.
1. Partially uninstall the source DCFM 10.4.X (refer to “Uninstallation” on page 81) on the 32-bit server.
2. Install Network Advisor 11.1.X (refer to “Installing the application” on page 24) on the 32-bit server and perform
auto-detected migration through the Copy Data and Setting screen (refer to “DCFM migration” on page 27).
3. Install Network Advisor 11.1.X (refer to “Installing the application” on page 24) on the 64-bit server and on the
Copy Data and Setting screen browse to the Network Advisor 11.1.X (32-bit server) location.
Migrating Network Advisor 11.0.X from a 32-bit server
If you are migrating data from a 32- bit server to a 64-bit server, complete the following steps to migrate.
1. Install Network Advisor 11.0.X (refer to “Installing the application” on page 24) on the 32-bit server.
2. Install Network Advisor 11.1.X (refer to “Installing the application” on page 24) on the 64-bit server
3. Migrate from the 32-bit server to the 64-bit server (refer to “Network Advisor migration” on page 43) and browse
to the Network Advisor 11.0.X (32-bit server) location on the Copy Data and Setting screen.
Migrating Network Advisor 11.1.X from a 32-bit server
If you are migrating data from a 32- bit server to a 64-bit server, complete the following steps to migrate.
1. Install Network Advisor 11.1.X (refer to “Installing the application” on page 24) on the 32-bit server.
2. Install Network Advisor 11.1.X (refer to “Installing the application” on page 24) on the 64-bit server
3. Migrate from the 32-bit server to the 64-bit server (refer to “Network Advisor migration” on page 43) and browse
to the Network Advisor 11.1.X (32-bit server) location on the Copy Data and Setting screen.
Configuring an explicit server IP address
If you selected a specific IP address from the Server IP Configuration screen during installation and the selected IP
address changes, you will not be able to connect to the server. To connect to the new IP address, you must manually
update the IP address information.
To change the IP address, complete the following steps.
1. Choose one of the following options:
• On Windows systems, select Start > Programs > Network Advisor 11.X.X > Network Advisor Configuration.
• On UNIX systems, execute sh Install_Home/bin/configwizard in terminal.
2. Click Next on the Welcome screen.
3. Click Yes on the confirmation message.
4. Click Next on the FTP Server screen.