Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 61
53-1002167-01
SAN Fabric monitoring
3
Monitoring discovered fabrics
NOTE
Monitoring is not supported on Hosts.
To monitor a fabric and all associated devices, complete the following steps.
1. Select Discovery > Fabrics.
The Discover Fabrics dialog box displays.
2. Select the fabric you want to monitor from the Discovered Fabrics table.
3. Click Monitor.
The monitor function fails if the fabric has user-defined Admin Domains created or if the fabric
is merged with another fabric already in the monitored state.
4. Click Close on the Discover Fabrics dialog box.
Stop monitoring of a discovered fabric
NOTE
Monitoring is not supported on Hosts.
When you stop monitoring of a fabric, you stop discovery of and data collection for the specified
fabric and all associated devices.
To stop monitoring a fabric and all associated devices, complete the following steps.
1. Select Discovery > Fabrics.
The Discover Fabrics dialog box displays.
2. Select the fabric you want to stop monitoring from the Discovered Fabrics table.
3. Click Unmonitor.
4. Click Close on the Discover Fabrics dialog box.