Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 1071
53-1002167-01
Database tables and fields
E
PERSISTENT_DISABLE 1 = port is persistently disabled. smallint
FICON_SUPPORTED 1 = FICON is supported; otherwise, 0. smallint
BLOCKED 1 = port is blocked; otherwise, 0. smallint
PROHIBIT_PORT_NUMBERS varchar 1024
PROHIBIT_PORT_COUNT smallint
NPIV Whether NPIV mode is enabled. smallint
NPIV_CAPABLE Instance NPIV mode capability:
1 = indicates port has NPIV capability
2 = NPIV license is enabled
smallint
NPIV_ENABLED Whether NPIV mode is enabled. smallint
FC_FAST_WRITE_ENABLED 1 = FC fast write is enabled. smallint
ISL_RRDY_ENABLED smallint
RATE_LIMIT_CAPABLE smallint
RATE_LIMITED smallint
QOS_CAPABLE smallint
QOS_ENABLED smallint
TUNNEL_CONFIGURED smallint
FCIP_TUNNEL_UP smallint
FCR_FABRIC_ID smallint
FCR_INTEROP_MODE smallint
CALCULATED_STATUS varchar 64
USER_DEFINED_VALUE1 varchar 256
USER_DEFINED_VALUE2 varchar 256
USER_DEFINED_VALUE3 varchar 256
KIND varchar 32
STATE varchar 64
PREVIOUS_STATUS This table can hold the same values as STATUS
column. But this will be holding the previous status of
the PORT. These values to be populated by switch
asset collector.
varchar 64
AUTO_DISABLE_CONFIGUR
ED
To represent auto disable configuration state (set by
user).
Default value is 0.
smallint
AUTO_DISABLED To represent auto disabled status (set by switch).
Default value is 0.
smallint
OCCUPIED Default value is 0. smallint
LAST_UPDATE bigint
PORT_BIT_MASK F-Port trunk bit mask value.
Default value is 0.
int
TABLE 238 SWITCH_PORT (Continued)
Field Definition Format Size