Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

68 Brocade Network Advisor SAN User Manual
53-1002167-01
Host discovery
3
7. Configure Host credentials, if necessary.
a. Enter the HCM Agent port number in the Port field.
b. Enter your username in the User ID field.
c. Enter your password Password field.
8. Repeat step 5 through step 7 for each Host you want to discover.
9. Click OK on the Add Host Adapters dialog box.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Hosts table with pending status. To update the status from
pending you must close and reopen the Discover Host Adapters dialog box.
10. Click Close on the Discover Host Adapters dialog box.
Importing Hosts from a CSV file
To discover Hosts by importing a CSV file, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Click Add.
The Add Host Adapters dialog box displays.
FIGURE 27 Add Host Adapters dialog box
3. Click Import.
The Open dialog box displays.