Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 1101
53-1002167-01
Database tables and fields
E
TAPE_ACCELERATION_ENABLED Whether TapeAccelaration is
enabled on that circuit
smallint
IKE_POLICY_NUM The IKE Policy on the
circuit.The default value is -1.
int
IPSEC_POLICY_NUM The IPSEC Policy on the
circuit'. The default value is
-1
int
PRESHARED_KEY The preshared Key on the
circuit
char( 32
SOURCE_IP SOURCE_IP of the circuit varchar 64
DEST_IP DESTINATION_IP of the
circuit
varchar 64
VLAN_TAG VLAN Tag of the circuit. The
default value is -1
int
SELECTIVE_ACK Select acknowledgement
flag.The default value is 0.
smallint
QOS_MAPPING QOS Mapping.
The default value is 0.
smallint
PATH_MTU_DISCOVERY MTU Discovery Path.
The default value is 0.
smallint
MIN_COMM_RATE Minimum communication
Speed. The default value is 0.
int
MAX_COMM_RATE Maximum communication
Speed. The default value is 0.
int
MIN_RETRANSMIT_TIME Minimum Retransmission
Time. The default value is -1
int
MAX_RETRANSMIT_TIME Maximum retransmission
time. The default value is -1
int
KEEP_ALIVE_TIMEOUT Keep Alive timeout. The
default value is -1
int
ADMIN_STATUS Is admin status enabled.
The default value is 0.
smallint
METRIC Circuit metric to set priority.
The default value is -1
int
DATA_L2_COS Class of service as defined by
IEEE 802.1p for circuit. The
default value is -1.
int
DSCP_DATA DiffServe marking for Data
Frame. The default value is
-1
int
TABLE 318 FCIP_TUNNEL_CIRCUIT (Continued)
Field Definition Format Size