Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

72 Brocade Network Advisor SAN User Manual
53-1002167-01
Host discovery
3
8. Click OK on the Add Host Adapters dialog box.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Hosts table with pending status. To update the status from
pending you must close and reopen the Discover Host Adapters dialog box.
9. Click Close on the Discover Host Adapters dialog box.
Editing Host adapter credentials
To edit Host credentials, complete the following steps.
1. Select Discover > Host Adapters.
The Discover Host Adapters dialog box displays.
2. Select the Host in the Discovered Hosts list and click Edit.
The Edit Host Adapters dialog box displays.
FIGURE 30 Edit Host Discovery dialog box
3. Enter the HCM Agent port number in the Port field if necessary.
4. Enter your username in the User ID field.
5. Enter your password Password field.
6. Click OK on the Edit Host Adapters dialog box.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
7. Cl ic k Close on the Discover Host Adapters dialog box.
Removing a host from active discovery
If you decide you no longer want the Management application to discover and monitor a specific
host, you can delete it from active discovery. Deleting a host also deletes the host data on the
server (both system collected and user-defined data) except for user-assigned names for the device
port, device node, and device enclosure information.