Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 1137
53-1002167-01
Database tables and fields
E
QOS_PRIORITY QOS Priority on the target. The default value is
'Unknown'.
varchar 64
QOS_FLOW_ID QOS Flow ID on the target. The default value is 0. varchar 64
CURRENT_SPEED Current speed of the remote port, as enforced by
TRL.
The default value is 0.
varchar 64
TRL_ENFORCED The default value is 0. varchar 16
BUS_NO Channel number in the PCI Bus. The default value is
0.
varchar 32
FCP_IM_STATE Indicates whether the Fibre Channel Protocol Input
Method (FCP-IM) is online or offline.
varchar 128
IO_LATENCY_MIN Minimum IO Latency value (< 79) in milliseconds and
is calculated when HBA port starts SCSI (FCP)
exchanges
varchar 32
IO_LATENCY_MAX IO Latency value in milliseconds and is calculated
when HBA port starts SCSI (FCP) exchanges
varchar 32
IO_LATENCY_AVERAGE Average IO Latency value in milliseconds and is
calculated when HBA port starts SCSI (FCP)
exchanges
varchar 32
DATA_RETRANSMISSION_S
UPPORT
Field to indicate whether the remote port supports
data retransmission.0 would mean unsupported and
nonzero value implies supported. The default value is
0.
smallint
REC_SUPPORT Field to indicate whether the remote port supports
the REC ELS command Channel number in the PCI
Bus.Zero would mean unsupported and nonzero
value implies supported. The default value is 0.
smallint
TASK_RENTRY_IDENT_SUP
PORT
The number of PRLI responses from the target to the
initiator and begins when HBA Port starts FCP
exchanges.Zero would mean unsupported and
nonzero value implies supported. The default value is
0.
int
CONFIRMED_COMPLETION
S_SUPPORT
The number of confirmed completions on the remote
port and begins when HBA Port starts FCP
exchanges.Zero would mean unsupported and
nonzero value implies supported. The default value is
0.
int
TABLE 387 HBA_PORT
Field Definition Format Size
DEVICE_PORT_ID Primary key on the owner Device port table int
CONFIGURED_STATE Indicates whether the port is enabled or disabled.
The default value is 0.
smallint
CONFIGURED_SPEED The configured speed of the port. E.g. Auto-negotiate varchar 64
TABLE 386 HBA_REMOTE_PORT (Continued)
Field Definition Format Size