Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 91

53-1002167-01

SAN Display

You can configure the display for FICON and reset the display to the default settings.

Setting your FICON display

FICON display setup rearranges the columns of any table that contains end device descriptions to

move the following eight columns to be the first columns: FC Address, Serial #, Tag, Device Type,

Model, Vendor, Port Type, and WWN.

To set the FICON display, complete the following steps.

1. Select Server > Options.

The Options dialog box displays (Figure 35).

FIGURE 35 Options dialog box (SAN Display option)

2. Select SAN Display in the Category list.

3. Click Set Up FICON Display.

All tables that contain end device descriptions display the following columns as the first eight

columns: FC Address, Serial #, Tag, Device Type, Model, Vendor, Port Type, and WWN.

4. Click Apply or OK to save your work.