Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 97
53-1002167-01
Flyovers
4
FIGURE 39 Options dialog box (Flyovers option, Product tab)
a. Select each property you want to display in the product flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
Fibre Channel (default)
IP
b. Click the right arrow to move the selected properties to the Selected Properties table.
c. Use the Move Up and Move Down buttons to reorder the properties in the Selected
Properties table, if necessary.
The properties displayed in the Selected Properties table appear in the flyover display.
• Name
• Device Type
• WWN
• IP Address
• Domain ID
• Class
• Tag#
• Serial #
• Vendor
• Model #
• Port Count
• Seed Switch
• Firmware
• Location
• Contact
• Description
• Management Link
• Operational Status
• Enclosure
• Reason
• FID
• Base Fabric for Transport
• Base Switch
• Zone Alias
• Display Name • IP Address