Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

112 Brocade Network Advisor SAN User Manual

53-1002167-01

SNMP Trap Forwarding Credentials

You can configure SNMP credentials for the traps forwarded by the server.

Configuring SNMP v1 and v2c credentials

To configure a SNMP v1 or v2c credentials, complete the following steps.

1. Select Server > Options.

The Options dialog box displays.

2. Select Trap Forwarding Credentials in the Category pane.

FIGURE 46 Options dialog box (Trap Forwarding Credentials option)

3. Enter the unique community string (case sensitive, 1 to 16 characters). in the Community and

Confirm Community fields.

Displays as asterisks. Allows all printable ASCII characters.

4. Click Apply or OK to save your work.

Configuring SNMP v3 credentials

To configure a SNMP v1 or v2c credentials, complete the following steps.

1. Select Server > Options.

The Options dialog box displays.

2. Select Trap Forwarding Credentials in the Category pane.

3. Enter a unique label (case sensitive, 1 to 16 characters) to identify the credentials in the User

Name field.

Allows all printable ASCII characters.