Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 113
53-1002167-01
Software Configuration
4
4. Select on of the following authentication types from the Authentication Type options.
• HMAC_MD5
• HMAC_SHA
5. Enter the SNMP v3 user name (case sensitive, 1 to 16 characters) in the Auth Password and
Confirm Password fields.
Allows all printable ASCII characters.
6. Select one of the following privacy protocol types from the Privacy Protocol options.
• CBC-DES
• CFB_AES-128
7. Enter the privacy password (case sensitive, 8 to 16 characters) in the Priv Password and
Confirm Password fields.
Displays as asterisks. Allows all printable ASCII characters.
8. Click Apply or OK to save your work.
Software Configuration
The Management application allows you to configure the following software settings:
• Client export port—A port for communication between the client and server.
• Client/Server IP—IP configuration settings.
• Memory allocation—Memory allocation for the client and server.
• Product communication—Connections between the server and SAN switches or IP products.
• FTP/SCP—Internal or external FTP server settings.
• Server port—Server port settings.
• Support mode—Support settings to allow enhanced diagnostics.
Client export port
You can configure a port for communication between the client and server.
Configuring the client export port
To configure client export port settings, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Client Export Port to assign a communications port between the client and server in the
Category list.