Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

122 Brocade Network Advisor SAN User Manual
53-1002167-01
Software Configuration
4
5. Click Apply or OK to save your work.
NOTE
Changes to this option take effect after an application restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 11.X.X > Server Management Console).
6. Click OK on the “changes take effect after application restart” message.
Product communication
You can configure connections between the switch and the Management application server.
Configuring SAN communication
To configure SAN communication, complete the following steps.
1. Select Server > Options.
The Options dialog box displays.
2. Select Product Communication from the Software Configurations list in the Category pane.
FIGURE 51 Options dialog box (Product Communication option)