Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 169

53-1002167-01

Viewing Call Home status

You can view call home status from the main Management application window or from the Call

Home Notification dialog box.

The Management application enables you to view the call home status at a glance by providing a

call home status icon on the Status Bar. The following table illustrates and describes the icons that

indicate the current status of the call home function.

To view more detail regarding call home status, click the Call Home icon. The Call Home

Notification dialog box displays the list of devices that have assigned filters or call home disabled.

The following table explains the statuses that may be displayed in the Call Home Notification dialog

box.

TABLE 14 Call Home Icons

Icon Description

Normal— Displays when call home is enabled on all devices and no filters are applied.

Degraded— Displays when call home is enabled on all devices and at least one filter is active.

Disabled— Displays when any of the following conditions are met:

• At least one device's call home is disabled.

• At least one non-manageable device.

• At least one device does not have the Management server registered as a trap recipient.

TABLE 15 Call Home Status

Status Description

Enabled The device is manageable, call home is enabled, and a filter is applied.

Disabled Call home is disabled on at least one device or call home is disabled from the Call Home

dialog box.

Not Manageable Manageability is lost.

Server Not

Registered

The Server is not registered to receive Call Home events from this device.

Note: Fabric OS switches only.