Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 183
53-1002167-01
Reverting to the default background color
7
3. Select or specify a color and preview it in the Preview pane.
• To pick a color from a swatch, select the Swatches tab. Select a color from the display.
• To specify a color based on hue, saturation, and brightness, click the HSB tab. Specify the
hue (0 to 359 degrees), saturation (0 to 100%), and brightness (0 to 100%).
• To specify a color based on values of red, green, and blue, click the RGB tab. Specify the
values for red, green, and blue (0 to 255).
4. Click OK to change the background color, or click Reset to return all settings to the color
currently being displayed on the topology.
5. Click OK on the Map Display Properties dialog box.
Reverting to the default background color
To revert back to the default background color, complete the following steps.
1. Right-click a group and select Map Display.
The Map Display Properties dialog box displays.
2. Select the Default option.
3. Click OK on the Map Display Properties dialog box.
Changing the product label
To change the product label, complete the following steps.
1. Select a product in the Connectivity Map or Product List.
2. Select View > Product Label, and select one of the following options:
• Name (Product). Displays the product name as the product label.
• WWN. Displays the world wide name as the product label.
• IP Address. Displays the IP address as the product label.
• Domain ID. Displays the domain ID as the product label.
• Zone Alias. Displays the zone alias as the product label.
Changes apply to all fabrics present in the topology when the Product Label option is selected.