Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 187
53-1002167-01
Customizing the main window
7
Deleting a custom connection configuration
NOTE
Active zones must be available on the fabric.
To delete a custom connection configuration, complete the following steps.
1. Choose one of the following options:
• Select a fabric on the topology and select View > Connected End Devices > Custom.
• Right-click a fabric on the topology and select Connected End Devices > Custom from the
shortcut menu.
The Connected End Devices - Custom display for Fabric dialog box displays.
2. Select the configuration you want to delete in the Application list.
3. Click Delete.
4. Click OK on the confirmation message.
5. Click OK on the Connected End Devices - Custom display for Fabric dialog box.
Customizing the main window
You can customize the main window to display only the data you need by displaying different levels
of detail on the Connectivity Map (topology) or Product List.
Zooming in and out of the Connectivity Map
You can zoom in or out of the Connectivity Map to see products and ports.
Zooming in
To zoom in on the Connectivity Map, use one of the following methods:
• Click the zoom-in icon ( ) on the Connectivity Map toolbar.
• Press CTRL and the plus sign on the number pad on the keyboard.
• Use the Zoom dialog box.
a. Select View > Zoom.
The Zoom dialog box displays.
FIGURE 69 Zoom dialog box