Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 245
53-1002167-01
SMI Agent configuration
9
Deleting a certificate
NOTE
You must have SMI Operation Read and Write privileges to view or make changes to the Certificate
Management tab.
To delete a certificate, complete the following steps.
1. Click the Certificate Management tab.
2. Select Client or Indication from the Authentication list.
The appropriate certificates display in the Certificates list.
3. Select the certificate you want to delete in the Certificates list.
4. Click Delete.
5. Click Yes on the confirmation message.
The selected certificate is removed from the Certificates list.
6. Click Close to close the SMIA Configuration Tool dialog box.
Viewing the configuration summary
To view summary information about the Server configuration and the current configuration,
complete the following steps.
NOTE
Server configuration changes in the Summary tab only take effect after the CIMOM restart.
NOTE
You can only restart the server using the Server Management Console (Start > Programs >
Management_Application_Name 11.X.X > Server Management Console).