Manualshelf

Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

ManualsBrandsHP ManualsSoftwareHP B-series Data Center Fabric Manager Enterprise Software
331332333334335336337338339340
Brocade Network Advisor SAN User Manual 291
53-1002167-01
Port Auto Disable
10
6. Clear any of the following selected event types.
• Port Auto Disable
• Loss Of Sync—Requires devices running Fabric OS 7.0 or later.
• Loss Of Signal—Requires devices running Fabric OS 7.0 or later.
• OLS (Offline Primitive Sequence)—Requires devices running Fabric OS 7.0 or later.
• NOS (Not Operational Primitive Sequence)—Requires devices running Fabric OS 7.0 or
later.
• LIP (Loop Initialization Primitive Sequence)—Requires devices running Fabric OS 7.0 or
later.
7. Cl ic k OK on the Configure Port Auto Disable dialog box.
8. Click OK on the Port Auto Disable dialog box.
Disabling port auto disable on all ports on a device
NOTE
The device must be running Fabric OS 6.3 or later.
To disable port auto disable on all ports on a device, complete the following steps.
1. Select Configure > Port Auto Disable.
The Port Auto Disable dialog box displays.
2. Select the fabric on which you want to disable port auto disable (PAD) from the Fabric list.
3. Select All Ports from the Show list.
4. Select the device on which you want to disable PAD on all ports.
5. Click Configure.
The Configure Port Auto Disable dialog box displays.
6. Clear any of the following selected event types.
• Port Auto Disable
• Loss Of Sync—Requires devices running Fabric OS 7.0 or later.
• Loss Of Signal—Requires devices running Fabric OS 7.0 or later.
• OLS (Offline Primitive Sequence)—Requires devices running Fabric OS 7.0 or later.
• NOS (Not Operational Primitive Sequence)—Requires devices running Fabric OS 7.0 or
later.
• LIP (Loop Initialization Primitive Sequence)—Requires devices running Fabric OS 7.0 or
later.
7. Cl ic k OK on the Configure Port Auto Disable dialog box.
8. Click OK on the Port Auto Disable dialog box.