Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

294 Brocade Network Advisor SAN User Manual
53-1002167-01
Creating a new Host
11
Creating a new Host
To create a new Host, complete the following steps.
1. Right-click an HBA icon and select Host Port Mapping.
The Host Port Mapping dialog box displays.
FIGURE 106 Host Port Mapping dialog box
2. Click New Host.
A new Host displays in the Hosts table in edit mode.
3. Double-click the new Host name to make it editable, type a name for the new Host, and press
Enter.
The name of the new Host appears in the Hosts table in alphabetical order. To assign HBAs to
this Host, refer to “Associating an HBA with a Host” on page 295.
4. Click OK to save your changes and close the Host Port Mapping dialog box.
Renaming an HBA Host
To rename a Host, complete the following steps.
1. Right-click an HBA icon and select Host Port Mapping.
The Host Port Mapping dialog box displays.
2. Click the Host you want to rename in the Hosts table, wait a moment, and then click it again.
The Host displays in edit mode.
3. Type a new name for the Host.
The name of the Host appears in the Hosts table in alphabetical order with the new name. To
assign HBAs to this Host, refer to “Associating an HBA with a Host” on page 295.
4. Click OK to save your changes and close the Host Port Mapping dialog box.