Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 295
53-1002167-01
Deleting an HBA Host
11
Deleting an HBA Host
To delete a Host, complete the following steps.
1. Right-click an HBA icon and select Host Port Mapping.
The Host Port Mapping dialog box displays.
2. Select the Host you want to delete in the Hosts table.
3. Click Delete.
The selected Host is deleted. Any HBAs associated with the Host are automatically moved from
the Host table to the HBAs table.
4. Click OK to save your changes and close the Host Port Mapping dialog box.
Viewing Host properties
To view Host properties, complete the following steps.
1. Right-click an HBA icon and select Host Port Mapping.
The Host Port Mapping dialog box displays.
2. Select the HBA Host port you want to view in the Hosts table.
3. Click Properties.
The Properties dialog box for the selected port displays.
4. Click OK to close the Properties dialog box.
5. Click OK to close the Host Port Mapping dialog box.
Associating an HBA with a Host
ATTENTION
Discovered information overwrites your user settings.
To associate an HBA with a Host, complete the following steps.
1. Right-click an HBA icon and select Host Port Mapping.
The Host Port Mapping dialog box displays.
2. Select the Host to which you want to assign HBAs in the Hosts table or click New Host to create
a new Host.
3. Select the HBA from the HBAs table on the left and click the right arrow.
The HBA displays in the Hosts table. The HBA is now associated with the selected Host.
4. Click OK to save your changes and close the Host Port Mapping dialog box.
On the Connectivity Map, the HBA displays in the Host.