Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 303
53-1002167-01
Viewing storage port properties
12
Viewing storage port properties
1. Open the Storage Port Mapping dialog box by performing one of the following actions:
- Select a storage port icon in the topology view, then select Discover > Storage Port
Mapping.
- Right-click any storage port icon in the topology view and select Storage Port Mapping.
- Right-click any storage port in the Device Tree and select Storage Port Mapping.
The Storage Port Mapping dialog box displays.
2. Select a storage port from the Storage Array list.
3. Click Properties.
The Properties dialog box displays.
4. Review the properties.
5. Click OK on the Properties dialog box.
6. Click OK on the Storage Port Mapping dialog box.
Viewing storage array properties
To view storage array properties, complete the following steps.
1. Open the Storage Port Mapping dialog box by performing one of the following actions:
- Select a storage port icon in the topology view, then select Discover > Storage Port
Mapping.
- Right-click any storage port icon in the topology view and select Storage Port Mapping.
- Right-click any storage port in the Device Tree and select Storage Port Mapping.
The Storage Port Mapping dialog box displays.
2. Select a storage array from the Storage Array list.
3. Click Properties.
The Properties dialog box displays.
4. Review the properties.
5. Click OK on the Properties dialog box.
6. Click OK on the Storage Port Mapping dialog box.