Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 315
53-1002167-01
Adapter software
13
Driver repository
You can access the Driver Repository dialog box from the Adapter Software dialog box. Initially, the
repository is empty. You must import files into the repository. Imported driver files are then
displayed in the Available Driver Files list in the Driver Repository dialog box.
Importing a driver into the repository
To import drivers into the Management application, perform the following tasks.
1. From the Adapter Software dialog box, click the Repository button.
The Driver Repository dialog box, shown in Figure 108, displays.
FIGURE 108 Driver Repository dialog box
2. Click Import on the Driver Repository dialog box.
The Import Driver Repository dialog box displays.
3. Locate the driver file using one of the following methods:
• Search for the file you want from the Look In list.
• Enter the name of the image file you want to import in the File Name field.
4. Click Open.
After the import completes successfully, you see a message that the boot image imported
successfully.
5. Click OK.