Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 327
53-1002167-01
Adapter port WWN virtualization
13
Enabling the FAWWN feature on a switch or AG ports
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
2. Select a switch port from the Fabric Assigned WWN - Configuration list.
3. Click the Enable button.
The selected switch’s Port status is enabled.
4. Click OK.
The Fabric Assigned WWN Confirmation and Status dialog box displays.
5. Click Start to save the changes to the switch.
6. Click Close on the Fabric Assigned WWN Configuration dialog box.
Disabling the fabric assigned WWN feature on a switch or AG port
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
2. Select a switch port from the Fabric Assigned WWN - Configuration list.
3. Click the Disable button.
The selected switch’s FAWWN feature status is disabled.
4. Click OK.
Auto-assigning a switch or AG port ‘s fabric assigned WWN
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
2. Select a switch port or AG port from the Fabric Assigned WWN - Configuration list.
3. Click the User button.
The systems sets the type to User and the Fabric Assigned WWN column cells are now
editable.
4. Enter a valid world wide name on the selected switch.
5. Click OK.