Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

330 Brocade Network Advisor SAN User Manual
53-1002167-01
Adapter port WWN virtualization
13
FIGURE 114 Add AG Fabric Assigned WWN Configuration dialog box
5. Enter a valid world wide name (WWN), with or without colons, for the Access Gateway node.
Optionally, you can select an existing AG Node WWN from the list. The AG Node WWN combo
box includes all discovered AG Node WWNs that are connected to the selected switch.
6. Enter a port or a port range using numbers or a hyphen (-). For example, you can enter a range
as 1-6 or you can separate values with a comma; for example: 1, 2, 5, 7-10, 20.
7. Cli c k t h e Enable checkbox to enable the Fabric Assigned WWN.
8. Set the fabric assigned WWN type to one of the following map types:
• Auto—If the switch port does not have an Auto FAWWN map type and the FAWWN feature is
not yet enabled on the port, a <To Be Generated> message displays.
• User defined—If this option is selected, you must enter a valid world wide name, with or
without colons. The User defined text box cannot be empty.
9. Click OK to add the rows for this configuration to the Fabric Assigned WWN Configuration - AG
Ports list.
Deleting AG port FAWWNs
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
2. Click the Attached AG Ports tab.
3. Select an online AG Fabric Assigned WWN row and click the Delete button.
The AG FAWWN row is cleared from the Fabric Assigned WWN Configuration - AG Ports list.
Moving an AG port ‘s FAWWN across switches
The AG port FAWWN can be online or offline when moved across switches.
1. Select Configure > Fabric Assigned WWN.
or
Right-click the switch and select Fabric Assigned WWN.
The Configure Fabric Assigned WWNs dialog box displays.
2. Click the Attached AG Ports tab.