Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 341
53-1002167-01
Switch policies
14
Configuring LLDP for FCoE
To configure LLDP for FCoE, complete the following steps.
1. Select Configure > DCB.
The DCB Configuration dialog box displays.
2. Select the switch to edit in the DCB Ports and LAGs table and click Edit.
The Edit Switch dialog box displays.
3. Click the LLDP-DCBX tab.
4. The Edit Switch - LLDP-DCBX tab dialog box displays.
FIGURE 119 DCB Edit Switch dialog box - LLDP-DCBX tab
5. Select the <Global Configuration> LLDP profile in the LLDP Profiles table.
6. Click the left arrow button to edit.
7. Select the FCoE Application and FCoE Logical Link check boxes in the Advertise table to
advertise them on the network.
8. Click OK after changing the attributes of the current deployment.
The Deploy to Products dialog box displays.
The Deployment Status dialog box launches.
9. Click Start on the Deployment Status dialog box to save the changes to the switch.
10. Click Close to close the dialog box.