Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

346 Brocade Network Advisor SAN User Manual
53-1002167-01
Switch policies
14
9. Click Start on the Deployment Status dialog box to save the changes to the selected LAG or
LAGs.
10. Click Close to close the Deployment Status dialog box.
Editing a DCB switch
1. Select Configure > DCB from the menu bar.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
2. Select the DCB switch from the Products/Ports table.
3. Click Edit.
The Edit Switch dialog box displays (Figure 121).
FIGURE 121 Edit Switch dialog box
4. Configure the policies for the Edit Switch tabs, which are described in the following sections:
• “QoS configuration” on page 352
• “FCoE provisioning” on page 359
• “VLAN classifier configuration” on page 362
• “LLDP-DCBX configuration” on page 366
• “802.1x authentication” on page 371
5. When you have finished configuring the policies, apply the settings to the switch.
NOTE
Clicking Cancel when there are pending changes launches a pop-up dialog.