Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 383
53-1002167-01
FCoE login groups
14
3. Change the name of the login group.
NOTE
The Fabric field and the Switch field are read-only fields.
4. Perform one of the following editing tasks:
• Rename the login group by entering the new name into the Name field. The Allow All option
must be selected to rename the login group.
• Select one of the following options to add or remove login members into the Available
Members list. The Allow Specific option must be selected to add or remove login members.
• Port WWN—Click to enter the world wide name (WWN) of the port to associate with the
selected switch. The member port WWN text field allows a maximum of 16 digits.
• Managed CNAs—Click to show a list of products and ports which can be selected as
login group members.
5. Select available members from the Products/Ports list and click the right arrow button to move
the available members to the Selected Members list.
6. Click OK.
The FCoE Login Group Confirmation and Status dialog displays.
7. Review the changes carefully before you accept them.
8. Click Start to apply the changes, or click Close to abort the operation.
On closing the FCoE Login Group Confirmation and Status dialog box, the FCoE Configuration
Dialog refreshes the data and the latest information is displayed.
• “FCoE login groups”
Deleting one or more FCoE login groups
1. Select Configure > FCoE from the menu bar.
or
Right-click the DCB device and select FCoE.
The FCoE Configuration dialog box displays.
2. Select a group from the Login Groups list and click Delete.
The FCoE Login Group Confirmation and Status dialog displays.
3. Review the changes carefully before you accept them.
4. Click Start to apply the changes, or click Close to abort the operation.
The login group is removed from the Login Group table.
• “FCoE login groups”