Manualshelf

Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

ManualsBrandsHP ManualsSoftwareHP B-series Data Center Fabric Manager Enterprise Software
441442443444445446447448449450
398 Brocade Network Advisor SAN User Manual
53-1002167-01
Layer 2 access control list management
15
Clearing L2 ACL assignments
To clear L2 ACL configuration from interfaces, complete the following steps.
1. Select Configure > Security > L2 ACL > Port.
The Port Selection - L2 ACL dialog box displays.
2. Select a port or LAG in the Available Ports table and click the right arrow button.
LAGs display in the Available Ports table using the following convention: Po LAG_Number.
3. Click OK.
The Device_Name - Port_Number/LAG LAG_Number - Layer 2 ACL Configuration dialog box
displays.
4. Select the Clear ACL Assignment option.
5. Click OK on the Device_Name - Port_Number/LAG LAG_Number - Layer 2 ACL Configuration
dialog box.
The Deploy to Ports - L2 ACL dialog box displays. To deploy the configuration, refer to “Security
configuration deployment” on page 400.
Creating a L2 ACL from a saved configuration
To create a L2 ACL from a saved configuration, complete the following steps.
1. Select the device and select Configure > Security > L2 ACL > Product.
The Device_Name - L2 ACL Configuration dialog box displays.
2. Select From Saved Configurations from the Add list.
The L2 ACL Saved Configurations dialog box displays.
3. Select one or more configurations to add to the new L2 ACL configuration.
4. Click OK on the L2 ACL Saved Configurations dialog box.
The new ACL displays in the ACLs table.
5. Click OK on the Device_Name - L2 ACL Configuration dialog box.
The Deploy to Products - L2 ACL dialog box displays. To save the configuration, refer to “Saving
a security configuration deployment” on page 402
Deleting a L2 ACL configuration from the application
To delete a L2 ACL configuration from the application, complete the following steps.
1. Select the device and select Configure > Security > L2 ACL > Product.
The Device_Name - L2 ACL Configuration dialog box displays.
2. Select the L2 ACL you want to delete in the ACLs table and click Delete.
This deletes the L2 ACL configuration from the application.