Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

404 Brocade Network Advisor SAN User Manual
53-1002167-01
Security configuration deployment
15
10. Choose one of the following options to configure the frequency at which deployment runs for
the schedule:
• To configure deployment to run only once, refer to “Configuring a one-time deployment
schedule” on page 404.
• To configure hourly deployment, refer to “Configuring an hourly deployment schedule” on
page 405.
• To configure daily deployment, refer to “Configuring a daily deployment schedule” on
page 405.
• To configure weekly deployment, refer to “Configuring a weekly deployment schedule” on
page 405.
• To configure monthly deployment, refer to “Configuring a monthly deployment schedule”
on page 406.
11. Click OK on the Schedule Properties dialog box.
12. Select one or more ports or products to which you want to deploy the configuration in the
Available Targets list and click the right arrow button to move them to the Selected Targets list.
13. Click OK on the Deploy to Products - L2 ACL dialog box.
Configuring a one-time deployment schedule
To configure a one-time schedule, complete the following steps.
1. Select One Time from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
Where the hour value is from 0 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
3. Click the Date list to select a date from the calendar.
To finish configuring the deployment schedule, return to one of the following procedures:
To configure security configuration schedule, refer to step 11 of “Scheduling a security
configuration deployment” on page 403.