Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)
Brocade Network Advisor SAN User Manual 407
53-1002167-01
Chapter
16
FC-FC Routing Service Management
In this chapter
•Devices that support Fibre Channel routing . . . . . . . . . . . . . . . . . . . . . . . . 407
•Fibre Channel routing overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 408
•Guidelines for setting up Fibre Channel routing . . . . . . . . . . . . . . . . . . . . . 409
•Connecting edge fabrics to a backbone fabric . . . . . . . . . . . . . . . . . . . . . . 410
•Configuring routing domain IDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 412
Devices that support Fibre Channel routing
The FC-FC Routing Service is supported only on the following devices:
• 40-port, 8 Gbps FC Switch
• 80-port, 8 Gbps FC Switch
• 48-port, 16 Gbps FC Switch
• 4 Gbps Router, Extension Switch
• 8 Gbps Extension Switch
• Any of the following blades on a Director chassis:
- 4 Gbps Router, Extension Blade
- FC 8 GB 16-port Blade
- FC 8 GB 32-port Blade
- FC 8 GB 48-port Blade - The shared ports area (ports 16-47) cannot be used as EX_Ports.
- 8 Gbps Extension Blade
• Any of the following blades on a Backbone chassis:
- 4 Gbps Router, Extension Blade
- FC 8 GB 16-port Blade
- FC 8 GB 32-port Blade
- FC 8 GB 48-port Blade - The shared ports area (ports 16-47) cannot be used as EX_Ports.
- FC 8 GB 64-port Blade
- 8 Gbps Extension Blade
- 16 Gbps 32-port Blade
- 16 Gbps 48-port Blade