Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

412 Brocade Network Advisor SAN User Manual

53-1002167-01

Configuring routing domain IDs

Logical (phantom) domains are created to enable routed fabrics. Two types of logical domains are

created:

• A front domain is created in edge fabrics for every interfabric link (IFL).

• A translate (Xlate) domain is created in routed fabrics that share devices.

Use the following procedure to change the domain IDs of these logical domains.

1. In the Product List or Connectivity Map, right-click the fabric for which you want to configure

logical domains, and select Routing Domain IDs.

The Configure Routing Domain IDs dialog box is displayed (Figure 152).

FIGURE 152 Configure Routing Domain IDs dialog box

2. Right-click anywhere in the Available Switches list and select Expand All in the right-click menu.

The switch group for the fabric expands to display the logical domains.

3. Select a logical domain, and click the right arrow button to move the switch to the Selected

Switches list.

4. Select a domain ID number from the Domain ID column in the Selected Switches list. The

Domain ID column lists unused domain IDs.

You may need to scroll right or drag the dialog box open further to see the Domain ID column.

5. Click OK.