Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

434 Brocade Network Advisor SAN User Manual
53-1002167-01
Smart card usage
18
FIGURE 156 Encryption Group Properties dialog box - Security tab
3. Click Register from Archive.
The Authentication Cards dialog box displays (Figure 157). The dialog box lists the smart cards
that are in the database.
FIGURE 157 Authentication Cards dialog box - registering smart cards from archive
4. Select a card from the table, then click OK.
5. Wait for the confirmation dialog box indicating initialization is done, then click OK.
The card is added to the Registered Authentication Cards table in the Encryption Group
Properties dialog box. (Figure 154.)
Deregistering an authentication card
Authentication cards can be removed from the database and the switch by deregistering them. Use
the following procedure to deregister an authentication card.
1. Select Configure > Encryption from the menu task bar.
The Encryption Center dialog box displays (Figure 153).
2. Select an encryption group from the Encryption Center Devices table, then select Group >
Security from the menu task bar, or right-click an encryption group and select Security.
The Encryption Group Properties dialog box displays, with the Security tab selected
(Figure 154).