Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 455
53-1002167-01
Steps for connecting to an SKM appliance
18
FIGURE 166 Key Vault Credentials dialog box
3. Enter the Brocade group user name and password.
Keep the following rules in mind when registering the Brocade user name and password:
- The user name and password must match the user name and password specified for the
Brocade group.
- The same user name and password must be configured on all nodes in an encryption
group. This is not enforced or validated by the encryption group members, so care must be
taken when configuring the user name and password to ensure they are the same on each
node.
- Different user names and passwords can never be used within the same encryption group,
but each encryption group may have its own user name and password.
- If you change the user name and password, the keys created by the previous user become
inaccessible. The Brocade group user name and password must also be changed to the
same values on SKM to make the keys accessible.
- When storage is moved from one encryption group to another and the new encryption
group uses a different user name and password, the Brocade group user name and
password must also be changed to the same values on SKM to make the keys accessible.
4. Repeat the procedure for each node.
Setting up the local Certificate Authority (CA) on SKM
To create and install a local CA, complete the following steps:
1. Log in to the SKM management web console using the admin password.
2. Select the Security tab.
3. Under Certificates & CAs, click Local CAs.