Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

460 Brocade Network Advisor SAN User Manual
53-1002167-01
Steps for connecting to an SKM appliance
18
Adding SKM appliances to the cluster
If you are adding an appliance to an existing cluster, select the Cluster Settings section of the
window, click Download Cluster Key, then save the key to a convenient location, such as your
computer's desktop.
To add SKM appliances to the cluster you are creating, you will need the original cluster member’s
local IP address and port number, and the location of the cluster key you downloaded, as specified
in “Creating an SKM High Availability cluster” on page 459.
Complete the following steps on each SKM appliance you want to add to the cluster:
1. Open a new browser window, keeping the browser window from Copying the Local CA
certificate open.
2. In the new browser window, log in to the management console of the SKM appliance that is
being added to the cluster, then click the Security tab.
3. In the Certificates & CAs menu, click Known CAs.
4. Enter the information required in the Install CA Certificate section near the bottom of the page.
- Enter the Certificate Name of the certificate being transferred from the first cluster
member.
- Paste the copied certificate data into the Certificate box.
5. Click Install.
6. In the Certificates & CA menu, click Trusted CA Lists.
7. Cl ic k Default Profile Name.
8. Click Edit.
9. Select the name of the CA from the list of Available CAs in the right panel.
10. Click Add.
11. Click Save.
12. Select the Device tab.
13. In the Device Configuration menu, click Cluster.
14. Click Join Cluster. In the Join Cluster section of the window, leave Local IP and Local Port set to
their default settings.
15. Enter the original cluster member’s local IP address into Cluster Member IP.
16. Enter the original cluster member’s local Port into Cluster Member Port.
17. Click Browse, then select the Cluster Key File you saved.
18. Enter the cluster password into Cluster Password.
19. Click Join.
20. After adding all members to the cluster, delete the cluster key file from the desktop.
21. Create and install an SKM server certificate. Refer to “Creating and installing the SKM server
certificate” on page 457 for a description of this procedure.