Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

470 Brocade Network Advisor SAN User Manual
53-1002167-01
Steps for connecting to a TKLM appliance
18
1. Select a switch from the Encryption Center Devices table, then select Switch > Export
Certificate from the menu task bar, or right-click the switch and select Export Certificate.
The Export Signed Certificate dialog box displays.
2. Select Signed switch certificate, then click OK.
A dialog box displays allowing you to save the signed certificate in .pem format in My
Documents on your work station.
3. Make a note of this location.
Converting the KAC certificate format
The KAC certificate exported from the encryption switch is in .pem format. It is automatically
converted to a .der format during the export process; however, if you need to manually convert the
file before importing it to the TKLM server, you can do so by completing the following steps:
1. Go to openssl utility.
2. Run
openssl x509 -outform der -in KAC_Certificate_Name.pem -out
KAC_Certificate_Name.der
.
Establishing a default key store and device group on TKLM
To establish a default key store and Fabric OS device group on TKLM, complete the following steps:
1. Obtain the necessary user credentials, then log in to the TKLM user interface.
2. Select Advanced Configuration > Keystore.
The Keystore page displays.
3. Click OK to accept the default keystore settings.
Adding a device to the device group
After you have established a default key store and Fabric OS device group on TKLM, add a
Fabric OS device to the device group.
1. Select Tivoli Key Lifecycle Manager > Welcome.
The device group BRCD_ENCRYPTOR you just created is displayed in the Administration panel.
2. Click Go.
The Configure Keys page displays. This page identifies this step as Step Two: Identify Drives.
3. Click Add on the Devices table menu task bar.
An entry is added to the table.
4. Under Device Serial Number, enter the serial number that is displayed for each node that you
are adding to the device group.