Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 11

53-1002167-01

User interface components

View All list

The View All list is located at the top left side of the window and enables you to create, copy, or edit

a view, select to how to view the Product list (All Levels, Products and Ports, Products Only, or Ports

Only) and to select which view you want to display in the main window. Does not display until you

discover a fabric. To discover a fabric, refer to “Discovering fabrics” on page 49.

1. Create View. Select to create a new view.

2. Copy View. Select to copy an existing view.

3. Edit View. Select to edit an existing view.

4. Levels. Select the level at which you want to view the Product list, Options include: All Levels,

Products and Ports, Products Only, or Ports Only.

5. View_Name. Any additional views that you create. Select which view you want to display in the

main window.

6. View All. Select to display the default view of the main window.

Port Display buttons

The Port Display buttons are located at the top right of the Product List and enable you to configure

how ports display. You have the option of viewing connected (or occupied) product ports,

unoccupied product ports, or attached ports. Not enabled until you discover a fabric or host.

NOTE

Occupied/connected ports are those that originate from a device, such as a switch. Attached ports

are ports of the target devices that are connected to the originating device.

FIGURE 7 Port Display buttons

1. Show/Hide Occupied Port. Displays or hides the ports of the devices in the fabrics (present in

the connectivity map) that are connected to other devices.

2. Show/Hide Attached Port. Displays or hides the attached ports of the target devices.

3. Show/Hide Unoccupied Port. Displays or hides the ports of the devices (shown in the

connectivity map) that are not connected to any other device.

1 23