Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

Brocade Network Advisor SAN User Manual 511

53-1002167-01

Creating high availability (HA) clusters

FIGURE 221 Encryption Group Properties dialog box - HA Clusters tab

NOTE

If you are creating a new HA cluster, a dialog box displays requesting a name for the new HA cluster.

HA Cluster names can have up to 31 characters. Letters, digits, and underscores are allowed.

Removing engines from an HA cluster

Removing the last engine from an HA cluster also removes the HA cluster.

If only one engine is removed from a two-engine cluster, you must either add another engine to the

cluster, or remove the other engine.

1. Select Configure > Encryption from the menu task bar.

The Encryption Center dialog box displays (Figure 153).

2. Select an encryption group from the Encryption Center Devices table, then select Group > HA

Cluster from the menu task bar, or right-click an encryption group and select HA Cluster.

The Encryption Group Properties dialog box displays, with the HA Clusters tab selected.

3. Select an engine from the High Availability Clusters table, then click the left arrow button.

(Refer to Figure 221.)

4. Either remove the second engine or add a replacement second engine, making sure all HA

clusters have exactly two engines.

5. Click OK.