Brocade Network Advisor SAN User Manual v11.1x (53-1002167-01, May 2011)

536 Brocade Network Advisor SAN User Manual
53-1002167-01
Tape LUN statistics
18
FIGURE 245 Tape LUN Statistics dialog box
5. To clear the tape LUN statistics for all member LUNs for the container, click Clear.
6. When prompted with a confirmation dialog box, click Yes.
7. To update the tape LUN statistics, click Refresh.
Viewing and clearing tape LUN statistics for specific tape LUNs
To view or clear statistics for tape LUNs in a container, complete these steps:
1. Select Configure > Encryption from the menu task bar.
The Encryption Center dialog box displays (Figure 153).
2. Select a group, switch, or engine from the Encryption Center Devices table that contains the
storage device to be configured, then select Group/Switch/Engine > Targets from the menu
task bar, or right-click a group, switch, or engine and select Targets.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays (Figure 242).
3. Select a tape target storage device, then click LUNs.
The Target Tape LUNs dialog box displays (Figure 246). The dialog box lists configured tape
LUNs.